if ( 3 != 3 ) then
set DAY = 2001.07.11_00
set FINAL = /synoptic/farside//FSI_lowres
set nuRANGE = .0025-.0045
set NUM_6H_BLOCKS = 6
setenv BASE_WD /home/soi/farside++
setenv FS_DATA `pwd`
pwd
setenv SCRIPTS /home/soi/farside++/scripts++
setenv INPUT /tmp/2001.07.11_00.1824/in
setenv OUTPUT /tmp/2001.07.11_00.1824/out
set path= ( /home/soi/farside++/scripts++ /home/soi/farside++/bin/_linux4 /home/soi/farside++/FS_scripts /home/soi/farside++/FS_bin/_linux4 ~CM/bin/_linux4 /bin /usr/bin )
setenv FRAMEDIR /tmp/2001.07.11_00.1824/out/FRAMES
setenv STACKLIST_NAME /tmp/2001.07.11_00.1824/out/STACKLIST01
setenv BLANK_NAME /tmp/2001.07.11_00.1824/out/BLANK
setenv REAL_STACKNAME PSI_X_T
setenv FOURIER_STACKNAME PSI_X_NU
setenv MEAN_IMAGE_NAME /tmp/2001.07.11_00.1824/out/MEAN_IMAGE
setenv SLOPE_IMAGE_NAME /tmp/2001.07.11_00.1824/out/SLOPE_IMAGE
setenv DEFECTIVE_PIX_LIST_NAME /tmp/2001.07.11_00.1824/out/DEFECTIVE_PIX_LIST
setenv MISSING_IMAGE_LIST_NAME /tmp/2001.07.11_00.1824/out/MISSING_IMAGE_LIST
setenv INPUT_DATACUBE /tmp/2001.07.11_00.1824/out/PSI_X_NU
setenv INTERMED_DATACUBE /tmp/2001.07.11_00.1824/out/PSI_X_NU_2.5_4.5mHz
setenv XPOSE_DATACUBE /tmp/2001.07.11_00.1824/out/XPOSE_PSI_X_NU_2.5_4.5mHz
setenv PHASE_CORR_1x3 /tmp/2001.07.11_00.1824/out/PHASE_CORR_1x3
setenv PHASE_CORR_2x2 /tmp/2001.07.11_00.1824/out/PHASE_CORR_2x2
set BASE_SIX_H = `time_index -6 time=$DAY':00'`
time_index -6 time=2001.07.11_00:00
@ START_SIX_H = 12452 - ( 6 / 2 )
@ END_SIX_H = 12452 + ( 6 / 2 ) - 1
echo *****************************************************
*****************************************************
echo ******starting farside image processing for 2001.07.11_00******
******starting farside image processing for 2001.07.11_00******
echo getting data. base six hour number: 12452
getting data. base six hour number: 12452
echo starting 6h num: 12449
starting 6h num: 12449
echo going until 6h num: 12454
going until 6h num: 12454
echo working directory: /tmp/2001.07.11_00.1824
working directory: /tmp/2001.07.11_00.1824
echo ********* producing lev 1.8 data *************
********* producing lev 1.8 data *************
set SIX_H = 12449
rm -r -f /tmp/2001.07.11_00.1824/in /tmp/2001.07.11_00.1824/out
mkdir /tmp/2001.07.11_00.1824/in
mkdir /tmp/2001.07.11_00.1824/out
echo copying parameters
copying parameters
cp -r /home/soi/farside++/scripts++/params /tmp/2001.07.11_00.1824/
echo working directory is  /tmp/2001.07.11_00.1824
working directory is  /tmp/2001.07.11_00.1824
echo setting up symbolic links
setting up symbolic links
rm -rf /tmp/2001.07.11_00.1824/out/eof_data_used
while ( 12449 < = 12454 )
set DATA_DIR = `PEQ4FSI 'vw_V_06h['$SIX_H']'`
PEQ4FSI vw_V_06h[12449]
sh: line 1: pvm: command not found
sh: line 1: pvm: command not found
sh: line 1: pvm: command not found
set: No match.