# Name: M_CCDHTROFF
#
# Date:
#
# created:	08 15 1994	SDW
# revisions:	
#
# Change Description
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure powers off the CCD Decontamination heater and
# Operational CCD heater controller.
#
# Intended Use
#
# This procedure should be initiated if the CCD temperatures go out of
# limits high.
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP or higher mode.  MDI operator notified as soon as possible
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1	HOC set point to 0 (000)		mbhcmspt   mkhcmspt   0
#		mbhcmspt 0
#  2 	HCM CCD decontamination heater off	mbpwhcmof  mkpwhcm   "OFF"
#  3	record MDI current, either			   MIPWA     -0.6
#	or						   MIPWB    
#  4	record CCD temperature				   QTMI1D 
#  5    end of procedure