# Name: M_CMON
#
# Date:
#
# created:	08 03 1994	SDW
# revisions:
#
# Change Description
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure powers up and initializes the CCD Camera.
#
# Intended Use
#
# Controlled initial power on of Image Processor as part of M_ON or M_WAKE
# procedures.
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP mode.  Medium rate telemetry support required for
# duration of power on sequence.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1    switch on camera			mbpwcmon   mkpwcm   "ON"
#  2    wait time 2 seconds
#  3    perform camera reset   			mbcmres
#  4	wait time 2 seconds
#  5    perform IP reset			mbiprsal
#  6	wait time 5 sec
#  7 	set IP to run condition			mbiprun
#  8    set A ampifier & CCD offset (aadc=3)    mbcmaadc
		mbcmaadc 3
#  9    record MDI current, either			   MIPWA    ~1.1
#      	or						   MIPWB    ~1.1
# 10	end of procedure