# Name: M_HCMOFF
#
# Date:
#
# created:	09 01 1994	SDW
# revisions:	
#
# Change Description
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure powers off the CCD decontamination heater 
#
# Intended Use
#
# Powering off the CCD decontamination heater
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP or higher mode.  Medium rate telemetry support required for
# duration of power on sequence.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.  
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1	record MDI current, either			   MIPWA     <1.5
#	or						   MIPWB     
#  2 	HCM CCD decontamination heater on	mbpwhcmof  mkpwhcm   "OFF"
#  3	record MDI current, either			   MIPWA     -0.3
#	or						   MIPWB     
#  4	record CCD temperature				   QTMI1D
#  5    end of procedure