# Name: M_HTRON
#
# Date:
#
# created:	08 03 1994	SDW
# revisions:	08 09 1994	SDW
#
# Change Description
#  1	 Changed name to M_HTRON, moved oven on to M_OVENON, moved
#	 temperature limits to M_TLIMITS
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This Procedure powers up and initializes the Optics Package and 
# Operational CCD heater controller.
#
# Intended Use
#
# Controlled initial power on of primary MDI CCD and optics package heater
# controllers following initial power up to SLEEP mode
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP mode.  Medium rate telemetry support required for
# duration of power on sequence.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.  This procedure should be completed
# as soon as possible following MDI power on.
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1    switch on OP/CCD heater controller 	mbpwhopn   mkpwhop   "ON"
#  2	HOC set point to 0			mbhcmspt   mkhcmspt  0
#		mbhcmspt 0
#  3    HOP set point to 0			mbhopspt   mkhopspt  0
#		mbhopspt 0				   mkhoph2   "OFF"
#							   mkhoph3   "OFF"
#  4	record MDI current, either			   MIPWA     ~0.7
#	or						   MIPWB     ~0.7
#  5    end of procedure