# Name: M_OVENMON
#
# Date:
#
# created:	08 15 1994	SDW
# revisions:	
#
# Change Description
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure initializes s/w monitoring on the Prime Oven heater 
# controller.  
#
# Intended Use
#
# Initiates s/w monitoring of MDI primary optics oven heater controller
# following initial capture to stabil operating temperature.
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP or higher mode.  Medium rate telemetry support required for
# duration of sequence.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.  This procedure should be completed
# as soon as possible following MDI power on.
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1	set max oven temp			mbovnmax   mkovnmax  204
#		mbovnmax 204
#  2	set oven monitoring time 1 minute	mbhpomtw   mkhpomtw    1
#		mbhpomtw 1
#  3	set oven monitoring on			mbhpomon   mkhpomon  "ON"
# 		mbhpomon
#  4	record MDI current, either			   MIPWA     <1.3
#	or						   MIPWB     
#  5    end of procedure