# Name: M_OVENON
#
# Date:
#
# created:	08 09 1994	SDW
# revisions:	
#
# Change Description
#
# None
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This Procedure powers up and initializes the Prime Oven heater controller.
#
# Intended Use
#
# Controlled initial power on of MDI primary optics oven heater controller
# following initial power up to SLEEP mode
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP mode.  Medium rate telemetry support required for
# duration of power on sequence.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.  This procedure should be completed
# as soon as possible following MDI power on.
#
# Steps
#
# Step	Description				Command	   Monitor  Value
#  1    switch on prime oven controller		mbpwhpon   mkpwhpo   "ON"
#  2    HPO set point to 2 (35 degC)		mbhpospt   mkhpospt  2
#		tcblock mbhpospt  2
#  3	record MDI current, either			   MIPWA     +0.4
#	or						   MIPWB     
#  4    end of procedure