# Name:	M_TLM2DEP
#
# Date:
#
# created:	08 15 1994	SDW
#
# Change Description
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure configures the DEP to use the redundant high rate telemetry 
# interface (board 2).
#
# Intended Use
#
# Set the DEP to use redundant high rate telemetry board 2.
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SLEEP mode following successful performances of M_TLM2ON 
# and nominal MDI power on.  M_TLM2ON is used to power up redundant 
# high rate TLM board.  S/C configured for redundant 
# high rate telemetry.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.
#
# Steps
#
# Step	Description				Command	  Monitor  Value
#  1	Tell DEP that redundant 160k telemetry  mbpwtm2o
#	interface is selected.
#	
#	tcblock mbpwtm2o
#
#  2	check TM select status			   	   mktmsel   "2"
#							   mstmseln  "2"
#  3    end of procedure