# Name:	M_TLM2IP
#
# Date:
#
# created:	08 15 1994	SDW
#
# Change Description
#
# MDI Author:	Scott Williams	415-725-0482
#
# Description
#
# This procedure configures the IP to use the redundant high rate telemetry 
# interface (board 2).
#
# Intended Use
#
# Set the IP to use redundant high rate telemetry board 2.
#
# Duration
#
# ?
#
# Requirements and Constraints
#
# MDI in SAFE mode following successful performances of M_TLM2ON and 
# M_TLM2DEP to power up redundant high rate TLM board and configure DEP 
# for its use.  S/C configured for redundant high rate telemetry.  
# High rate rate telemetry support required for duration of IP configuration 
# sequence and high rate TLM checkout.  MDI Operator on station to support
# verification of procedure.  MDI operator verification required for
# each step before continuing.
#
# Steps
#
# Step	Description				Command	  Monitor  Value
#  1	load IP patch to use redundant high	mbdpml
	rate tlm into DEP memory	
		mbdpml 0x2000 2 0x200 0x60e4
#  2	load IP patch into IP wcs		mbiplwcs
		mbiplwcs 1 0x2000 2 0 0 0 0 0 0 0 0 0 0 0 4
#  3	reload camera header			mbcmhdr1
		mbcmhdr1 0x4040 0x4040 0 1 
#  4    end of procedure