; FILE:    hr_v1_c1_m2.ips
; PURPOSE: Make a high resolution magnetogram and average dopplergram and
;	   downlink the extracted dopplergram, extracted continuum filtergram
;	   and the full 2x2 bin magnetogram.
; PAGE USAGE:
;	   From MK_HR_MVL30
;			page 19		full continuum filtergram (not compressed)
;			page 7		full velocity
;			page 17		full magnetogram
;	   From within here
;			Page  4		extracted continuum filtergram
;			Page  6 *	sqrt compressed filtergram
;			Page 15	*	extracted velocity
;			Page 19		binning of magnetogram
;			Page 18	*	binned magnetogram
;
; HISTORY: 2-May-96 by M.Morrison
;	 3-May-96 (MDM) - Changed to do the compression here after the extract
;	 9-May-96 (MDM) - Changed to do callback downlink a frame later
;			  downlink V&M at PRIME30 frame 8, instead of 7.

QPROG_HR_V1_C1_M2::

    BRANCHEQ R3072 10 &DONE					;don't do anything with frame 10
								;the processing at frame 9 takes so long
								;that when it returns from the "HR_MVL30"
								;subroutine call, the frame number has changed!

    CALLQUE  $QSR_HR_MVL30					;do all of the work
    BRANCHLT R3072 9 &DONE					;don't do anything unless frame 9 (or 10)

    COPYRD2D $IPRL_EXTRACT_60K $IPRL_EXTRACT_PARAM 6            ;setup the parameters to be used by the extract subroutine

    ;---- Extract 600 lines from continuum and compress
    SETREGS  $IPRL_EXTRACT_INST 4 19:0x0726 4:0x0726            ;setup source/destination page of the extract
    CALLQUE  $QSR_FMT_EXTRACT                                   ;extract the image      0.3 sec

    SETREGS  $IPRL_SQRT_PARAM   4 4:0x00726 6:0x0726		;source must be 0-7,16-19
    CALLQUE  $QSR_SQRT_COMP					;0.3 sec

    ;---- Extract 600 lines from velocity
    SETREGS  $IPRL_EXTRACT_INST 4 7:0x0726 15:0x0726            ;setup source/destination page of the extract
    CALLQUE  $QSR_FMT_EXTRACT                                   ;extract the image      0.3 sec

    ;---- Bin the magnetogram data
    SETREGS  $IPRL_BIN_PARAM 4 17:0x0726 18:0x0726 		;setup source and dest page of the bin
    CALLQUE  $QSR_FMT_2X2BIN

    ;---- Downlink the one observable
    SETREGS $IPRL_DL_PARAM 1 0x3000				;downlink cont filt
    CALLQUE $QSR_DL_1PAGE

    SETREG $IPRL_CB_ADDR &QCB_REENTRY                           ;set the callback register with the address to go to
DONE:

    END

;----------------------- Start of callback code
QCB_REENTRY::
    BRANCHEQ R3072  8  &CB_FRM08
    GOTO &QSR_CB_DONE_ADDR

CB_FRM08:
    ;---- Downlink the two observables
    SETREGS  $IPRL_DL_PARAM 2 0x7800 0x9000			;downlink vel and 2x2 mag
    CALLQUE  $QSR_DL_2PAGE					;0.6 sec
    SETREG $IPRL_CB_ADDR 0                                      ;clear the callback register
    GOTO &QSR_CB_DONE_ADDR