; FILE:    hr_f1_v2_m2.ips
; PURPOSE: Make a high resolution magnetogram and average dopplergram and
;	   downlink the full 2x2 bin dopplergram, full continuum filtergram
;	   and the full 2x2 bin magnetogram.
; PAGE USAGE:
;	   From MK_HR_MVL30
;			page 6	*	full compressed continuum filtergram
;			page 7		full velocity
;			page 17		full magnetogram
;	   From within here
;			Page 15	*	binned velocity
;			Page 18	*	binned magnetogram
;			Page 19		binning of magnetogram and vel
;
; HISTORY: 
;	Written 13-May-96 by M.Morrison
;	14-May-96 (MDM) - Added conditional to start downlink of continuum at Cam
;			  frame 8 (v&m had to be later, or cont had to be earlier --
;			  cont used to be at frame 10)
;	20-May-96 (MDM) - Moved continuum downlink to start at cam frame 7
;	18-Jul-96 (MDM) - Renamed to "hr_f1_v2_m2" from "hr_c1_v2_m2"
;			- Added the compression subroutine call
;	 1-Aug-96 (MDM) - Modified to do the first downlink at cam frame 10
;			  so that it would work with other observations.
;			  Moved so that a shorted data product was downlinked
;			  first.  Change included moving callback from
;			  frame 8 to 4.
;	 1-Aug-96 (MDM) - Moved callback from frame 4 to frame 5
;	 4-Mar-97 (MDM) - After the HR magnetogram alignment step was added,
;			  the phasing of the downlinks was messed up.  The M2
;			  is starting later and is being interrupted by F1.
;			  From 12-Aug-96 14:00 image set, the following is found
;				M2 = 181 transfer frames =  9.95 sec
;				F1 = 558 transfer frames = 30.69 sec
;				V2 = 220 transfer frames = 12.10 sec
;							  ==========
;							   52.74 sec
;			  There appears to be margin in the minute so shifting
;			  the start of the F1/V2 downlink by one frame should
;			  fix the problem.
;			- Moved callback from frame 5 to frame 6

QPROG_HR_F1_V2_M2::

    BRANCHEQ R3072 10 &DONE					;don't do anything with frame 10
								;the processing at frame 9 takes so long
								;that when it returns from the "HR_MVL30"
								;subroutine call, the frame number has changed!


    CALLQUE  $QSR_HR_MVL30					;do all of the work
    BRANCHLT R3072 9 &DONE					;don't do anything unless frame 9 (or 10)

    ;---- Compress the continuum filtergram
    SETREGS  $IPRL_SQRT_PARAM   4 19:0x00726 6:0x0726       ;source must be 0-7,16-19
    CALLQUE  $QSR_SQRT_COMP                                 ;0.3 sec

    ;---- Bin the velocity
    SETREGS  $IPRL_BIN_PARAM 4 7:0x0726 15:0x0726		;setup source/destination page of the bin
    CALLQUE  $QSR_FMT_2X2BIN

    ;---- Bin the magnetogram data
    SETREGS  $IPRL_BIN_PARAM 4 17:0x0726 18:0x0726 		;setup source and dest page of the bin
    CALLQUE  $QSR_FMT_2X2BIN

    ;---- Downlink the one observable
    SETREG  $IPRL_DL_PARAM 0x9000				;downlink mag
    CALLQUE $QSR_DL_1PAGE

    SETREG $IPRL_CB_ADDR &QCB_REENTRY                           ;set the callback register with the address to go to
DONE:

    END

;----------------------- Start of callback code
QCB_REENTRY:
    BRANCHEQ R3072  6  &CB_FRM06
    GOTO &QSR_CB_DONE_ADDR

CB_FRM06:
    ;---- Downlink the two observables
    SETREGS  $IPRL_DL_PARAM 2 0x3000 0x7800			;downlink cont filt and mag
    CALLQUE  $QSR_DL_2PAGE					;0.6 sec
    SETREG $IPRL_CB_ADDR 0                                      ;clear the callback register
    GOTO &QSR_CB_DONE_ADDR