EBZ 2 Jan 97
			   RUNNING CAMPAIGNS
			   -----------------

- Procedure for running campaigns during VC2:

  1. Hit "START" on EGSE Command Selection display page to be enabled for 
     commanding

  2. Highlight "PROCS" and select q_seq_options, which brings up the 
     campaign sequence options menu and select new/chain options

  3. From the instance, get the campaign name

  4. On a shell window, type whatscam <campaign name> and use the number it 
     shows as the address of the campaign in #6 (the address list is also on 
     the web on Mons Ops Summary page)

  5. Select "New Cam Addr and Flag"

  6. Type in the address of the campaign (the number from #4)

  7. If you are done commanding, hit the STOP button on the EGSE Command 
      Selection display page


- Procedure for running campaigns before VC2: (to set the chain address)

	Do everything the same except under new/chain options set only the
	chain address


- opsdb

  The opsdb files in /md80/mdi_egse_sw/dbase/cal/info store information
  about the campaigns and observations that have been developed.  The 
  opsdb_all files describe all existing campaigns and/or observations;
  the opsdb_active files describe the ones that are currently resident
  inside the DEP.