PROC C_FL_CCEVDSDN
;VERSION 1
IF (P@NRT_STATE#TELECOMMAND = "ENABLED")THEN
/NRT TPUT PAUS
ELSE
ENDIF

GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: 	C_FL_CCEVDSDN
;#		   	CDS Name: 	
;#		   	CDS Issue:	
;#			Simulator Validation Status:
;#
;#		1.2	Date Created:  23-MAY-95
;#			    Revision:  27-OCT-95 TFM
;#
;#		1.3	Change Description:	
;#
;#			1. Changed ts in name to fl.
;#
;#		1.4	Point of Contact:	MHill
;#			FOT Author:  MHill	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			Send VDS relay disable
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	TBD
;#
;#		2.4	References:
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			NONE
;#
;#		3.3	Special Constraints or Activities
;#
;#			NONE
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

/CCEVDSDN		;Send VDS relay disable
WAIT		;Verify command buffer contents
/SEND
WAIT UNTIL (P@CSSVDSN = "DISABLE")

;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		NONE
;#
;#**************************************************************************

IF (P@NRT_STATE#TELECOMMAND = "PAUSE-ENAB")THEN
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")
/NRT TPUT RSUM
/CMSMSG CDS 'PROCEDURE C_TS_CCEVDSDN HAS BEEN COMPLETED'
ELSE 
ENDIF
RETURN
ENDPROC