PROC C_FL_GSTIMS
; VERSION 1
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: 	C_FL_GSTIMS
;#		   	CDS Name: 	
;#		   	CDS Issue:	
;#			Simulator Validation Status:
;#
;#		1.2	Date Created:  19-MAY-95
;#			    Revision:  27-OCT-95 TFM
;#
;#		1.3	Change Description:	
;#
;#			1. Changed ts in name to fl.
;#
;#		1.4	Point of Contact:	MHill
;#			FOT Author: MHill 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This procedure is derived from C_TS_GIS section 12 for GSCT2.
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	TBD
;#
;#		2.4	References:
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			NONE
;#
;#		3.3	Special Constraints or Activities
;#
;#			NONE
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

;******SECTION 12******

;STIMULATE DETECTORS
/CBGSTIMN		;Detector Stim ON
WAIT		;Verify command buffer contents
/SEND

WAIT 5

/CBGSTIMV,14F6		;Detector Stim Voltage
WAIT		;Verify command buffer contents
/SEND

WAIT 5

/CBGD4LLT,9E02		;Detector 4 LLT
WAIT		;Verify command buffer contents
/SEND

WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/NRT TPUT RSUM
/CMSMSG CDS 'CHECK BKGPCD1,BKGRCD1 = 27000 +/- 1000,BKGULCD1 = 0 +/- 1000'
/CMSMSG CDS 'CHECK BKGPCD2, BKGRCD2 = 27000 +/- 1000, BKGULCD2 = 0 +/- 1000'
/CMSMSG CDS 'CHECK BKGPCD3, BKGRCD3 = 27000 +/- 1000, BKGULCD3 = 0 +/- 1000'
/CMSMSG CDS 'CHECK BKGPCD4, BKGRCD4 = 27000 +/- 1000, BKGULCD4 = 0 +/- 1000'

WAIT  ;WAIT FOR CHECK ON CDS IWS: BKGPCD1,BKGRCD1 = 27000 +/- 1000,BKGULCD1 = 0 +/- 1000
	;BKGPCD2, BKGRCD2 = 27000 +/- 1000, BKGULCD2 = 0 +/- 1000
	;BKGPCD3, BKGRCD3 = 27000 +/- 1000, BKGULCD3 = 0 +/- 1000
	;BKGPCD4, BKGRCD4 = 27000 +/- 1000, BKGULCD4 = 0 +/- 1000
/NRT TPUT PAUS

OUT:
;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		NONE
;#
;#**************************************************************************
RETURN
ENDPROC