PROC F_FL_ALSEN_OF ; VERSION 2 GOTO BEGIN ; ;#************************************************************************** ;# ****PROCEDURE HEADER**** ;# ;# 1.0 Introduction ;# ;# 1.1 FOT Name: F_FL_ALSEN_OF ;# MMS-F Name: ;# SUM Issue: ;# Simulator Validation Status: ;# ;# 1.2 Date Created: 05-MAY-95 BS ;# Revision: 1. 12-MAY-95 BS ;# 2. 25-OCT-95 BB ;# ;# 1.3 Change Description: ;# ;# 1. Correct cmd comments. Cmds turn sensors off. No TSTOL change. ;# 2. Changed proc name from TS to FL. Updated version number. ;# ;# 1.4 Point of Contact: ;# FOT Author: BSAPPER ATSC/SOHO 286-4799 ;# ;#************************************************************************** ;# 2.0 Description ;# ;# 2.1 Narrative Description ;# ;# PUT CELIAS IN POWER OFF MODE ;# ;# 2.2 Intended Use: ;# ;# Power off all 3 CELIAS sensors (MTOF,CTOF,STOF). ;# ;# 2.3 Duration: TBD ;# ;# 2.4 References: ;# ;#************************************************************************** ;# 3.0 Instructions for Use: ;# ;# 3.1 Parameters Required ;# ;# None ;# ;# 3.2 Critical Activities ;# ;# TBD ;# ;# 3.3 Special Constraints or Activities ;# ;# TBD ;#************************************************************************** ;# 4.0 STEPS: BEGIN: IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN ELSE /CLEAR ;Clearing the Command Buffer. ENDIF /FBCMOD0I ;Power off CTOF WAIT ;VERIFY BUFFER CONTENTS /SEND WAIT UNTIL (P@FSDMODC = "Power Off") /FBMMOD0I ;MTOF power off WAIT ;VERIFY BUFFER CONTENTS /SEND WAIT UNTIL (P@FSDMODM = "Power Off") /FBSMOD0I ;STOF power off WAIT ;VERIFY BUFFER CONTENTS /SEND WAIT UNTIL (P@FSDMODS = "Power Off") ;#************************************************************************** ;# 5.0 Final Constraints ;# ;# TBD ;# ;#************************************************************************** ENDPROC