PROC F_FL_STANDBY
GOTO BEGIN
;
;#***********************************************************************
;#	****PROCEDURE HEADER****
;#
;#	1.0	Introduction
;#
;#		1.1	FOT Name: F_FL_STANDBY
;#			MMS-F Name:
;#			SUM Issue:
;#			Simulator Validation Status
;#
;#		1.2	Date Created: 17-SEP-95 WB
;#			 Revision: 1.  08 DEC 95 RS
;#
;#		1.3	Change Description:
;#			1. Removed data word for /FBSEUVOF command.
;#		1.4	Point of Contact:
;#			    Author: W.Bornemann MPE 49-89-3299-3842
;#***********************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Decription
;#			Set STOF to standby mode and HV"s and commands to default.
;#
;#		2.2	Intended Use:
;#
;#		2.3	Duration:	TBD
;#
;#		2.4	References:
;#
;#***********************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#		None
;#	3.2	Critical Activities
;#
;#
;#		TBD
;#
;#	3.3	Special Constraints or Activities
;#
;#
;# *************************************************************************	
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR	;Clearing the Command Buffer.
ENDIF

/FBSMOD1I                 ;STOF standby mode
WAIT              ;VERIFY BUFFER CONTENTS
/SEND

WAIT UNTIL (P@FSDMODS = "Standby")

/FBSS1OF           ;Set Sweep HV1 OFF
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSS2OF           ;Set Sweep HV2 OFF
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSDISSS          ;Disable STOF Sweep HV
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSSWV,0000       ;Set Sweep 1+2 Voltage to ch#0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSHDOF           ;HSTOF HV Off
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSDISHD          ;Disable HSTOF Deflection
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSHDV,0000       ;Set HSTOF Voltage to Step 0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSMBOF           ;Set MCP Bias Converter off
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSDISMB          ;Disable MCP Bias
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSM1V,0000       ;Set MCP1 Bias Converter: ch#0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSM2V,0000       ;Set MCP2 Bias Converter: ch#0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSSBOF           ;Set SSD Bias Converter off
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSDISSB          ;Disable SSD Bias              
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSSBV,0000       ;Set SSD Bias Converter: ch#0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSSGV,0000       ;Set SSD Grid Converter: ch#0
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSGRP1,3400,3000,2C00,2800,2400,2000,1C00,1800,1400,1000,0C00,0800,0400,0000
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSIFC,E404,0000  ;Set data I/F control
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSCAL,8000            ;Set internal calibration control
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/FBSEVS,7800            ;Set EVS control
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")


/FBSPOS,7000            ;Set POS enable
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")


/FBSEUVOF		;Sem Power off
WAIT               ;VERIFY BUFFER CONTENTS
/SEND
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")


WAIT UNTIL (P@FSSESSW = "Off")
WAIT UNTIL (P@FSSEHD  = "Off")
WAIT UNTIL (P@FSSEMB  = "Off")
WAIT UNTIL (P@FSSESB  = "Off")

;#***********************************************************************
;#   5.0   Final Constraints
;#
;#         TBD
;#
;#***********************************************************************
ENDPROC