PROC H_FL_EFUNC_2
;version 4
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: H_FL_EFUNC_2   
;#		   	MMS-F Name: H_FL_EFUNC_2  	 
;#		   	SUM Issue: N/A
;#			Simulator Validation Status: Validated
;#
;#		1.2	Date Created:  7 MAR 1995    TL		
;#			    Revision:  1)  5 APR 95  TL
;#                            2) 11 AUG 95  TL
;#                            3) 19 Sep 95  TL
;#                            4) 25 Oct 95  TL
;#
;#		1.3	Change Description:	
;#
;#			1) Changed one nmemonic, changed 3 parameters.
;#             2) Changed parameters to commands.
;#             3) Changed last soft wait statement.
;#             4) Added version number, comments.
;#
;#		1.4	Point of Contact: T. LA FAVE	
;#			FOT Author: T. LA FAVE 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This module tests transition of ESU from ON mode to
;#             MAINTENANCE mode and back to ON with hardware reconfig
;#             while in MAINTENANCE mode.  It will test HED medium and
;#             low gain H2 channels, LED D1i (i=2,4,6), and D2 low
;#             gain channels.
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	19 min.
;#
;#		2.4 References:
;#             Page h_cepac1
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#
;#			None
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

WAIT UNTIL (P@HSEMODE = "MAINTENANCE")
WAIT UNTIL (P@CMD_STATE = "AVAILABLE")
/HBEUPLD3,4CA2,2B00,C500  ; Upload data
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 65

/HBEUPLD3,4CA2,3002,0000  ; Upload data
/HBEUPLD3,4CA2,3602,E000
/HBEUPLD3,4CA2,2C00,0400
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 65

/HBEUPLD3,4CA2,3A00,1F00  ; Upload data
/HBEUPLD3,4CA2,383B,0000
/HBEUPLD3,4CA2,3B5C,5400
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND
WAIT 180

/HBEUPLD3,4CA2,3A00,1000  ; Upload data
/HBEUPLD3,4CA2,3859,8000
/HBEUPLD3,4CA2,3B5C,5400
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 180

/HBEUPLD3,4CA2,3A00,1500  ; Upload data
/HBEUPLD3,4CA2,3800,0000
/HBEUPLD3,4CA2,3C00,0000
/HBEUPLD3,4CA2,3B00,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 65

/HBEUPLD3,4CA2,3A00,0100  ; Upload data
/HBEUPLD3,4CA2,3846,8000
/HBEUPLD3,4CA2,3C41,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 180

/HBEUPLD3,4CA2,3A00,0100  ; Upload data
/HBEUPLD3,4CA2,3846,8000
/HBEUPLD3,4CA2,3C11,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 180

/HBEUPLD3,4CA2,3A00,0100  ; Upload data
/HBEUPLD3,4CA2,3846,8000
/HBEUPLD3,4CA2,3C05,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT 180

/HBEUPLD3,4CA2,3A00,1500  ; Upload data
/HBEUPLD3,4CA2,3800,0000
/HBEUPLD3,4CA2,3C00,0000
/HBEUPLD3,4CA2,3B00,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND

WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/HBEUPLD3,4CA2,3002,1000  ; Upload data
/HBEUPLD3,4CA2,3602,F000
/HBEUPLD3,4CA2,2C00,0000
/HBECNFHW                 ; Configure hardware
WAIT                      ;Verify command buffer contents
/SEND


;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		None
;#
;#**************************************************************************
ENDPROC