PROC H_FL_ETCAINIT
;Version 3
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name:	H_FL_ETCAINIT   
;#		   	MMS-F Name: H_FL_ETCAINIT 	 
;#		   	SUM Issue: N/A  
;#			Simulator Validation Status: Validated
;#
;#		1.2	Date Created: 18 Sep 95  TL
;#			    Revision: 	1. 25 Oct 95	TL  
;#						2.  5-DEC-95	MH
;#                            3.  6 Dec 95   TL
;#
;#		1.3	Change Description:	
;#
;#			1. Added version number, comments.
;#			2. Changed secon data word of HBEUPLD3 from 4001 to 4000 and 
;#			   third data word from 1200 to FD00 as directed in OCD-32.
;#             3. Added 2 upload commands to end of proc.
;#
;#		1.4	Point of Contact: T. La Fave	
;#			FOT Author: T. La Fave 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			Initialize and adjust ESU TCA.
;#
;#		2.2	Intended Use:
;#
;#             To prevent operational heaters from switching on in
;#             ambient conditions during S/C integration an testing.
;#		
;#		2.3	Duration:	3 min.
;#
;#		2.4	References:
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#
;#			ESU must be in STANDBY mode.
;#     		
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

/HBEUPLD3,4C1E,4000,FD00  ; Upload data
WAIT   ; Verify command buffer contents
/SEND
WAIT 65

/HBEWREEP,501E,401E,4040,4300  ; Write EEPROM from RAM 
WAIT   ; Verify command buffer contents
/SEND
WAIT 65

/HBERESET  ; ESU reset
WAIT   ; Verify command buffer contents
/SEND

WAIT UNTIL (P@CMD_STATE = "AVAILABLE")
WAIT UNTIL (P@HSEMODE = "STANDBY")
/HBEUPLD3,4C09,C8FF,0000        ; Upload data
/HBEUPLD3,4C09,C9FF,0000
WAIT                            ; Verify cmd buf contents.
/SEND
;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		None
;#
;#**************************************************************************
ENDPROC