PROC H_FL_FCAL
;Version 3
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: H_FL_FCAL   
;#		   	MMS-F Name: H_FL_FCAL
;#		   	SUM Issue: N/A   	
;#			Simulator Validation Status: Validated
;#
;#		1.2	Date Created:  7 MAR 1995    TL
;#			    Revision:  1) 11 Aug 95  TL
;#                            2) 25 Oct 95  TL
;#                            3) 30 Nov 95  TL
;#
;#		1.3	Change Description:	
;#
;#			1) Changed name to _FL_ (FLight ready).
;#			2) Added version number, comments.
;#             3) Removed /HBFUPLD2 command, unneeded.
;#
;#		1.4	Point of Contact: T. LA FAVE	
;#			FOT Author: T. LA FAVE 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This module will switch on EPHIN in-flight calibrator.
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	1 min.
;#
;#		2.4 References:
;#             Page h_cepac2
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#
;#			None
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

/HBFTMODE                   ; Put EPHIN in TEST mode
WAIT                        ; Verify command buffer contents
/SEND

;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		None
;#
;#**************************************************************************
ENDPROC