PROC H_FL_FON
;Version 1
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: H_FL_FON	   
;#		   	MMS-F Name: H_FL_FON 	 
;#		   	SUM Issue: N/A	
;#			Simulator Validation Status: Validation
;#
;#		1.2	Date Created: 19 Sep 95  TL 
;#			    Revision: 1) 25 Oct 95  TL
;#
;#		1.3	Change Description:	
;#
;#			1) Added version number, comments.
;#
;#		1.4	Point of Contact: T. La Fave	
;#			FOT Author: T. La Fave 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			EPHIN switch on after in flight switch off.
;#
;#		2.2	Intended Use:
;#
;#		
;#		2.3	Duration:	5 min.
;#
;#		2.4	References: Page h_cepac2,h_cepac3
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#
;#			None
;#     		
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:


IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

/HBCFON             ;Switch EPHIN on
WAIT                        ; Verify command buffer contents
/SEND

WAIT UNTIL (HKCPWRSF = 1)
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")

/HBFAPON           ;Switch analog power on
WAIT                        ; Verify command buffer contents
/SEND

WAIT UNTIL (HSFAPW = 1)

;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		None
;#
;#**************************************************************************
ENDPROC