PROC H_FL_FSTANDBY
;Version 3
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name: H_FL_FSTANDBY   
;#		   	MMS-F Name: H_FL_FSTANDBY 
;#		   	SUM Issue:  N/A	  	
;#			Simulator Validation Status: Validation
;#
;#		1.2	Date Created:  7 MAR 1995    TL
;#			    Revision:  1) 1 MAY 1995    TL
;#			    Revision:  2) 11 Aug 95   TL
;#                            3) 25 Oct 95  TL
;#
;#		1.3	Change Description:	
;#
;#			1) Changed WAITs to check raw, not discrete, values.
;#			2) Changed name to _FL_ (FLight ready).
;#			3) Added version number, comments.
;#
;#		1.4	Point of Contact: T. LA FAVE	
;#			FOT Author: T. LA FAVE 	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This module will switch EPHIN from nominal observation
;#             mode to STANDBY mode.  The module is self-standing and
;#             can be used independently whenever this transition is
;#             necessary.
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	4 min.
;#
;#		2.4 References:
;#             Page h_cepac2
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#
;#			None
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

/HBFSMODE           ;Put EPHIN in STANDBY mode
/HBFAPON            ;Switch analog power on
WAIT                ; Verify command buffer contents
/SEND

WAIT UNTIL ((HSFMODE= 0) AND (HSFPDAF= 0) AND (HSFPDG= 0))

;#***************************************************************************
;#	5.0	Final Constraints
;#
;#		None
;#
;#**************************************************************************
ENDPROC