PROC L_LCPWAONN

;Version 0


IF (P@NRT_STATE#TELECOMMAND = "ENABLED")THEN
/NRT TPUT PAUS
ELSE
ENDIF

GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name:  L_LCPWOANN   
;#		   	MMS-F Name: 	 
;#		   	SUM Issue:   	
;#			Simulator Validation Status:
;#
;#		1.2	Date Created:  1/23/96
;#			    Revision:     
;#
;#		1.3	Change Description:	
;#
;#			NONE
;#
;#		1.4	Point of Contact:  CCazeau
;#
;#			FOT Author:  C.Q	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This procedure allows the PI team to send command /lcpwoann
;#
;#		2.2	Intended Use:
;#
;#			
;#
;#		2.3	Duration:	 TBD
;#
;#		2.4  References:	LASCO/EIT EXPERIMENT GUIDE
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			
;#
;#		3.2	Critical Activities
;#
;#			None
;#
;#		3.3	Special Constraints or Activities
;#			
;#			
;#
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF


/LCPWAONN		;LEB POWER ON A-SIDE
WAIT			;VERIFY COMMAND BUFFER
/SEND

IF (P@NRT_STATE#TELECOMMAND = "PAUSE-ENAB")THEN
WAIT UNTIL (P@CMD_STATE#TELECOMMAND = "AVAILABLE")
/NRT TPUT RSUM
/CMSMSG LASCO 'PROCEDURE L_LCPWAONN HAS COMPLETED'
ELSE
ENDIF

;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		TBD
;#
;#**************************************************************************


ENDPROC