PROC m_fl_regdump
;verdion 3
GOTO BEGIN
;
;#**************************************************************************
;#	****PROCEDURE HEADER****
;#
;# 	1.0 	Introduction
;#
;#		1.1	FOT Name:    m_fl_regdump
;#		   	MMS-F Name:  	 
;#		   	SUM Issue:   	
;#			Simulator Validation Status:
;#
;#		1.2	Date Created:  5-26-95
;#			    Revision:  1.  06-JUN-95  BS
;#						2.	9-12-95 RR
;#						3. 11/18/95 GJ
;#
;#		1.3	Change Description:	
;#
;#			1. /MBDPMD,1000,7B50,0200 -> /MBDPMD,1000,7B54,0200.
;#			2. corrected data words
;#			3. Changed name convention from m_ts_* to m_fl_*.
;#
;#		1.4	Point of Contact:	
;#			FOT Author:  RRowe	ATSC/SOHO	286-4799
;#
;#**************************************************************************
;#	2.0	Description
;#
;#		2.1	Narrative Description
;#
;#			This procedure dumps the DEP sequence registers from DEP memory
;#
;#		2.2	Intended Use:
;#
;#			To allow inspection of the DEP register configuration
;#
;#		2.3	Duration:	TBD
;#
;#		2.4 References:
;#
;#**************************************************************************
;#	3.0	Instructions for Use:
;#
;#		3.1	Parameters Required
;#
;#			None
;#
;#		3.2	Critical Activities
;#
;#			TBD
;#
;#		3.3	Special Constraints or Activities
;#
;#			MDI in SLEEP or higher mode.  At least medium rate telemetry
;#			support required for duration of register dump.
;#**************************************************************************
;#	4.0	STEPS:

BEGIN:

IF (P@CMD_STATE#TELECOMMAND = "AVAILABLE") THEN
ELSE
	/CLEAR		;Clearing the Command Buffer.
ENDIF

wait;	'GO' to dump 1st 128 DEP registers

/mbdpmd,1000,8cb4,0100
/send


;#************************************************************************** 
;#	5.0	Final Constraints
;#
;#		TBD
;#
;#**************************************************************************
ENDPROC